Lithofin KF Grout Protector is a special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF).

Lithofin KF Grout Protector is a ready-to-use, solvent free special impregnator based on a combination of high quality water and oil repellent compounds.

Lithofin KF Grout Protector penetrates well into porous surfaces due to its low viscosity. Once dry, the remaining active ingredients show a good water and an excellent oil repellent effect. Oil and other substances remain on the surface where they can easily be removed before they cause stains.

Lithofin KF Grout Protector makes removing greasy kitchen dirt much easier. The appearance on the surface is not altered; it may however become slightly darker.

Lithofin KF Grout Protector is for protecting absorbent, porous cement based grouting especially in kitchens and sanitary areas.

Lithofin KF Grout Protector Technical Data:
Density: approx. 1,0 g/cm³
Appearance: liquid, clear
Odour: unspecified
pH-Value: approx. 4,5
Flash Point: n.a.

Directions for Use:
The surface to be treated must be absorbent, clean and free of grease. Use Lithofin KF Grout Cleaner to clean grout lines. Evenly and generously apply Lithofin KF Grout Protector undiluted to the dry surface with a brush or roller. In case of highly absorbent cement grouting, repeat the application several times. After approx. 20 minutes, completely remove all product residues with a cloth. Do not allow the product to dry on the surface. Please Note: always try the product in an inconspicuous area prior to use. Protect glass, porcelain, polished and varnished surfaces, plastics and other sensitive surfaces against splashes. Drying Time: approx. 2 hours. The impregnator will be fully effective after 48 hours, protect the surface against water, oil, etc. during this time.

Coverage when treating grout joints: approx. 10m² per 500ml.

Storage:
Keep closed, cool and dry. Frost-free. Shelf life of up to two years.